|
|
 |
We are exclusive agents in India for M/S Akaram Limited, Switzerland who are OEM Suppliers for Silicon Coted Belts. M/S Akaram Limited, Switzerland is a renowned manufacturer of technically revolutionized, upgraded version of Super Velox Belt for MAT Washing Machine and is Top Most both in life and performance. It is more economical in as much as the results are fantastic and life is much longer and performance. |
 |
| Salient features of Akaram Supervelox Belt are as under : |
|
|
| 1. |
Time saving. Mounting the belt is only 3 hours as against 2 to 3 days with the normal belt and the high grip that Saves One Washing Cycle per day, a huge cost saving. |
| 2. |
It takes only one hour for removing the belt for maintenance. |
| 3. |
The difference is lying in the material used which is of higher quality strong material than the normal belt. |
| 4. |
Super grip due to special silicone coating – No slippage - No creases or damage even with light weight fabrics. |
| 5. |
Saving of one washing cycle at least per day due to Super grip resulting in higher productionand reduction in cost. |
| 6. |
Temperature resistance upto 90°C. |
| 7. |
White PTFE (Teflon) virgin sheet 4.5mm length x 1700 mm width x 2mm thickness is used to ensure longer life. |
| PRODUCTS FOR Superfinish, Contipress & Supercrabb M-Tec Machine : |
 |
1. Endless Silicone Blanket for Superfinish, Contipress & Supercrabb M-Tec Machine
PES Felt Base heat set app. 4,5mm with base fabric (scrim heat set for high stability) |
| Silicone coating |
Thickness app. 4,5mm - Fine polished for top smooth surface |
| Temperature Resistant |
up to 180°C max. |
| Inner Circumference |
6.200mm (+/-2%) |
| Width |
1.850mm up to 2.500mm(+/- 2%) |
| Original Belt Quality! |
| Delivery time |
app. 2-3 weeks after receipt of payment |
| PRODUCTS FOR CONTINUOUS DECATISING MACHINES |
1Endless Neelded Carrier Blanket for Continuous Decatising M/C.
ORIGINAL QUALITY FOR: M-Tec, Hemmer, Kettling & Braun, Gessner, Sperotto, Bisio & KD.
PES Felt with Base Fabric - heat set under tension and high temperature |
| PES Felt |
with Base Fabric - heat set under tension and high temperature |
 |
| Thicknes |
app. 4mm - Weight/m² app. 2.000g & app. 5mm - app. 2.400g |
| Temperature Resistance |
up to 160°C max. |
| Circumference |
6.500mm up to 12.700mm and bigger - Width: up to 3.200mm |
| Delivery time |
app. 2-3 weeks | |
| 2. Endless needled Shrink On Sleeves for Cointinuous Decatising M/C. |
 |
PES Felt |
1 sleeve in app. 8mm thickness |
| Orignal Quality For |
M-Tec, Hemmer, Kettling & Braun, Gessner, Sperotto, Bisio & KD. |
| Surface Density g/m² |
app. 2.700g - Air permeability (m³/m²/min) ap. 0,19-0,28 |
| Shrinking rate |
with either Water (95°C) or Air (200°C = 15-20%) |
| Temperature Resistance |
up to 160°C max. |
| For Diamters |
500mm, 550mm, 1.200mm, 1.272mm - Width: up to 3.200mm |
| Delivery time |
app. 2-3 weeks | | |
| 3. PES Fleece Top Covering With Non Marking Ends for Continuous Decatising M/C. |
| Thickness |
app. 3mm |
 |
| ImportantRemark |
Back side heat treated for a top fit of the layers! No slippage is possible!!! |
| Roll Length |
app. 22m - Width: 200cm |
| Attn |
Only for m-Tec machines up to a felt width of 2.000mm |
| |
| |
| 4. Acrylic Underbedding Fabric |
 |
Length |
25m Width: 210cm |
| Attn. |
Only for m-Tec machines up to a felt width of 2.000mm |
| Delivery time Pos. 3 & 4 |
app. 2 weeks |
| |
|
| |
|
| |
| |
| MAT - SUPERVELOX AND COMBISOFT M/C. |
| 1. VECO-SI-ORG Conveyor Belt For MAT SUPERVELOX & COMBISOFT M/C. |
| Temperature |
Resistant up to 160°C max. - Thickness app. 26mm |
 |
| Endless |
Silicone Conveyor Belt Quality - Original! |
| Inner Circumference |
3.400mm Width: 1.700mm (size to be confirmed)
(other sizes on inquiry!) |
| Delivery time: |
app. 3-4 weeks |
| |
| |
| Alternatively Superior Belt Quality - For Supervelox M/C. only! |
 |
Temperature |
Resistant up to 80°C max. - Thickness app. 26mm |
| Endless |
Silicone Conveyor Belt Quality |
| Inner Circumference |
3.400mm Width: 1.700mm (size to be confirmed)
(other sizes on inquiry!) |
| Delivery time |
app. 3-4 weeks |
| |
| |
| 3. PTFE - Virginal Gliding Sheet (see picture right hand side above the belt!) |
| Thickness |
app. 2mm - Length: 4.500mm Width: 1.700mm |
| Delivery time |
app. 3-4 weeks |
|
